Combined T1 Telephone and Internet
An Integrated T1 line shares bandwidth between digital phone lines
and broadband Internet service. Typically up to 12 phones lines
can be accommodated. If the T1 line is set up to be a dynamic
T1, then any bandwidth not used for telephone calls is automatically
available for Internet access.
Bonding T1 Lines for Higher
While a standard T1 line provides 1.5 Mbps upload and download
bandwidth, lines can be bonded to create total bandwidths of 3
Mbps, 4.5 Mbps, 6 Mbps, 7.5 Mbps, 9 Mbps, 10.5 Mbps and 12 Mbps.
An advantage T1 lines have over fiber optic connections is that
they are available nearly everywhere without special construction.
Logistics and Transportation
Trucking, warehousing, railroads and similar businesses need reliable
voice and data bandwidth. Point to Point T1 lines provide exclusive
and secure transmission between facilities for data transfers,
PBX telephone tie lines, and IP telephony.
T1 Lines are Full Duplex
T1 lines are bidirectional or full duplex. That means that you
can independently upload and download data at up to the full line
rate of 1.5 Mbps simultaneously. LANs that use switched Ethernet
are also full duplex, but LANs that use hubs operate at half-duplex.
A half-duplex network cannot transmit and receive at the same
time, cutting effective bandwidth by up to half.
How do T1 and DS1 differ?
In general conversation, T1 and DS1 refer to the same thing. But
strictly speaking, T1 refers to a physical line circuit consisting
of 2 pair of copper wires with strict line signal specifications.
DS1 stands for Digital Signal level 1. DS1 is the service level
you get on a T1 line. However, DS1 also is part of the digital
signal hierarchy used in T3 lines and SONET fiber optic carriers.