T1 vs DSL for Business Broadband
T1 lines set up as T1 Dedicated Internet connections give business
users guaranteed bandwidth of 1.5 Mbps both upload and download,
plus a SLA service level agreement to assure line reliability.
DSL is a "best effort" Internet service that is offered
without any service guarantee on a shared connection. Bandwidth
varies depending on how heavily other businesses are using the
connection.
Channelized and Unchannelized
T1 Lines
A T1 line may be configured as a single large pipe offering 1.5
Mbps data transport or as 24 individual channels of 64 Kbps each,
ideal for use as individual outside telephone lines to support
Key or PBX business telephone systems.
What Are Pseudowires?
A pseudowire is a virtual "circuit" that emulates a
traditional digital telecom service but on a packet switched network.
MPLS networks are especially suitable for pseudowires. By using
a pseudowire circuit, you can get the point to point connectivity
you desire without having to re-engineer your facilities to accommodate
a different protocol network.
T1 Digital Cross Connect Systems
A digital cross connect system, often abbreviated DCS or DCAS,
allows you to switch traffic among your T1 lines. It will even
reach into the line to connect individual channels or timeslots
rather than the entire circuit. A manual device that cross connects
T1 lines is called a DCX or patch panel.
What is POTS mean?
POTS is a telecommunications industry acronym for "Plain
Old Telephone Service." POTS lines are the analog telephone
lines that have been trenched or dropped into nearly every business
and residence in the country. POTS service is based on standards
that have been well established for over a hundred years.