T1 vs DSL for Business Broadband
T1 lines set up as T1 Dedicated Internet connections give business
users guaranteed bandwidth of 1.5 Mbps both upload and download,
plus a SLA service level agreement to assure line reliability.
DSL is a "best effort" Internet service that is offered
without any service guarantee on a shared connection. Bandwidth
varies depending on how heavily other businesses are using the
Advantage of Colocation Bandwidth
Colocation is locating your servers in a colocation facility,
also known as a carrier hotel. Advantages of this approach include
ready availability of low cost bandwidth including T1, DS3, Carrier
Ethernet and SONET Fiber Optic options. These data centers also
offer backup power, environmental control and high levels of security.
What Are Pseudowires?
A pseudowire is a virtual "circuit" that emulates a
traditional digital telecom service but on a packet switched network.
MPLS networks are especially suitable for pseudowires. By using
a pseudowire circuit, you can get the point to point connectivity
you desire without having to re-engineer your facilities to accommodate
a different protocol network.
T1 Lines are Full Duplex
T1 lines are bidirectional or full duplex. That means that you
can independently upload and download data at up to the full line
rate of 1.5 Mbps simultaneously. LANs that use switched Ethernet
are also full duplex, but LANs that use hubs operate at half-duplex.
A half-duplex network cannot transmit and receive at the same
time, cutting effective bandwidth by up to half.
T1 Line Bandwidth Explained
A T1 line is typically referred to as having a bandwidth of 1.5
Mbps. The precise line speed is 1.544 Mbps. However, the usable
bandwidth or payload is actually 1.536 Mbps. The difference is
8 Kbps which is used for line framing to keep the transmitting
and receiving ends of the circuit in synchronization.