T1 PRI For PBX Telephony
A T1 PRI, also called an ISDN PRI, is a "Primary Rate Interface"
providing 23 individual digitized telephone lines plus data such
as Caller ID on a single digital telephone trunk line. A PRI line
is usually much less expensive than a dozen or more analog business
Bonding T1 Lines for Higher
While a standard T1 line provides 1.5 Mbps upload and download
bandwidth, lines can be bonded to create total bandwidths of 3
Mbps, 4.5 Mbps, 6 Mbps, 7.5 Mbps, 9 Mbps, 10.5 Mbps and 12 Mbps.
An advantage T1 lines have over fiber optic connections is that
they are available nearly everywhere without special construction.
Channelized T1 vs ISDN PRI
T1 lines can support two protocols of switched circuit telephony.
Channelized T1 lines offer 24 phone lines using in-band signaling.
ISDN PRI, or Primary Rate Interface, offers 23 phone lines and
common channel signaling that can include data such as ANI Automatic
Number Identification or Caller ID.
T1 and T3 Lines for Wireless
A WISP or Wireless Internet Service Provider needs a way to connect
the Internet to the tower radios. T1 lines and bonded T1 lines
are widely used for this purpose, as well as cellular tower backhaul,
because of their almost universal availability. T3 lines offer
28x the bandwidth of T1 lines but are typically more available
in larger metropolitan areas.
Bandwidth to Support Convergence
Convergence means combining or converging voice, data and video
onto a single network. Enterprises usually need to expand their
LAN bandwidth and set up a QoS or Quality of Service priority
system to give priority to real-time streams such as telephone
calls or video conference feeds, which are more sensitive to network
delays than data transfers. Most often, the common protocol for
convergence is IP.